FlowPod

Flowpod

The FlowPod is Litre Meter’s latest flow indication display unit.

Utilising state-of-the-art technology; the FlowPod comes in a compact and light weight flame proof Stainless Steel enclosure that is only 85mm in diameter and weighs in at only 1.5kg. The FlowPod is one of the smallest flow displays for the Chemical injection industry on the market today.

The back-lit display (4-wire only) with high contrast ratio large flow rate indication and totalizer digits, enables the display to be easily read at distance in poorly lit conditions. The FlowPod comes equipped with Litre Meter – Memory Card input.
LM-MC has been developed by Litre Meter for 2-wire low powered systems. The LM-MC enables calibration data to be easily swapped without having to remove the FlowPod from the installation or having to perform difficult calibration curve changes on site. The LM-MC has data logging capabilities to enable recalibration to be tailored to flow rate of the meter as specified by the client.
The FlowPod can be controlled without having to power down, due to integrated magnetic switches that allows for simple programming and menu selection.
The flow meter can come with either direct mounted or remote mounted using suitable armoured signal cable or conduit.
The standard specification consists of a HART 7 protocol output on a two or four wire 24 Vdc powered system.

Data Sheet

Key Advantages

Compact
2 or 4 wire
2 sensing options
Tool-less assembly
Rotatable through 360 display
Low Maintenance
Highly Durable
LM memory card (LM-MC)
Reduced size and weight
Easy wiring
Full programmable HART
Stainless steel enclosure
Exia
Exd Class 1 Div 1
IP66/IP68

Key Features:

Exia- ATEX, IECEX
Exd- CSA(US): Class1 Div1 (B,C,D)
CSA(CAN): Class1 Div1 (B,C,D)
ATEX: Ex db IIC
IECEX: Ex db IIC
IP 66/IP68 dual certified
-20 to +75°C
2 or 4 wire 4-20mA HART 7 programming and monitoring
Compact lightweight 316 stainless steel housing
Rotatable through 360° for optimised viewing angle
2 sensing options - standard and hi-res - both with bidirectional sensing
Removable LM-MC storage card for data logging & offsite programming
Local programming
Resettable and non-resettable Totaliser
Batch control
Power: 12 – 30 Vdc (Exd)
12 – 30 Vdc (Exia)

Display Features:

Pulsing Input Indicator: This pulses at low flow, as a visual check of flow rate.
Total Digits: A total of 8 digits with the option to display: non resettable total, a resettable total and the resettable reverse flow total.
Rate Digits: The large 5 digits display the real time flowrate, the large digits and high contrast allows this to be easily read from a distance in poor light conditions.
Units: The option to display the flowrate and total in many different units, depending on your requirements.
Flow range usage: displays the flow rate in 20 steps - programmable.
Menu options: the simple local program option. To scroll through the menu options using a magnet and to make simple display changes or to reset the totals.