Flowmeter Products

Filters applied: maxtem: MaxTemp02 [x]

Displaying 34 results

spacer
LF15
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. PVD coated titanium rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

  • 0 to 90 litres per hour
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
MF30
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Titanium rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

  • 0 to 180 litres per hour 
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
VFF4
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Titanium rotor dependent on pressure and flow rate range.

  • 0 to 400 litres per hour
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
VFF8
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Titanium rotor dependent on pressure and flow rate range.Hazardous area approved as standard.

  • 0 to 800 litres per hour
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
LF03
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. PVD coated titanium rotor. Hazardous area approved as standard.

  • 0 to 18 l/hr
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
HF20
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. PVD coated titanium rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

  • 0 to 1200 l/hr
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
HF40
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Titanium PVD coated rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

  • 0 to 2400 l/hr 
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
HF66
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Titanium coated rotor dependent on pressure and flow rate range. Hazardous area approved as standard. Special order only.

  • 0 to 4000 l/hr 
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
V270
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Titanium, PVD coated rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

  • 0 to 16,500 l/hr 
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
LMSS
     
Pick

Pelton Wheel flowmeter with high pressure 316 stainless steel body, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 0.004 to 0.06 l/min up to 0.1 to 28 l/min.
  • +/-2% reading - linearity. [003 and 005 linearisation required]
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    LMTi
         
    Pick

    Pelton Wheel flowmeter with titanium body, for aggressive applications, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 0.004 to 0.06 l/min up to 0.1 to 28 l/min.
  • +/-2% reading - linearity. [003 and 005 linearisation required]
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    LMHa
         
    Pick

    Pelton Wheel flowmeter with Hastelloy body, for aggressive applications, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 0.004 to 0.06 l/min up to 0.1 to 28 l/min.
  • +/-2% reading - linearity. [003 and 005 linearisation required]
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    LMDu
         
    Pick

    Pelton Wheel flowmeter with high pressure Duplex body, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 0.006 to 0.1 l/min up to 0.1 to 28 l/min and 33 l/min.
  • +/-2% reading - linearity.
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    MMSS
         
    Pick

    Designed for use with high pressure and/or high temperature applications. Pelton Wheel flowmeter with 316 stainless steel body, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 1 to 65 l/min up to 10 to 500 l/min. (up to 300 to 5500 l/min by special order)
  • +/-2% reading - linearity.
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    MMTi
         
    Pick

    Designed for use in aggressive applications. Pelton Wheel flowmeter with titanium body, providing a pulse output Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 1 to 65 l/min up to 10 to 500 l/min. (up to 300 to 5500 l/min by special order)
  • +/-2% reading - linearity.
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    640S Steel-Mass
         
    Pick

    Insertion mass flow meters; NEMA 4X and Hazardous Area Approvals: FM, ATEX, CSA, EEx, PED, CE, Cenelec; Smart electronics; Insertion probe lengths 6? to 36?

    More Information

    Open PDF
    780S Flat-Trak
         
    Pick

    In-line mass flow meters; NEMA 4X and Hazardous Area Approvals: FM, ATEX, CSA, EEx, PED, CE, Cenelec; Smart electronics; Body size 1/4" to 8" NPT, Buttweld or ANSI

    More Information

    Open PDF
    780S-UHP Ultra High Purity
         
    Pick

    Ultra-High-Purity In-Line mass flow meter; NEMA 4X and Hazardous Area, Approvals: FM, ATEX, CSA, EEx, PED, CE, Cenelec; Smart electronics; flow body sizes from 3/8? to 6?.

    More Information

    Open PDF
    205 Innova-Sonic
         
    Pick

    Ultrasonic flowmeter system incorporating digital signal processing. Innova-Sonic offers a low power consumption, clear display and user friendly menu selection.

    More Information

    Open PDF
    206 Innova-Sonic
         
    Pick

    In-line Ultrasonic flowmeter system incorporating digital signal processing. Innova-Sonic offers a low power consumption, clear display and user friendly menu selection. 1" to 10".

    More Information

    Open PDF
    210 Innova-Sonic
         
    Pick

    Fully field portable ultrasonic system complete with spare battery pack, non-invasive clamp-on transducers, mounting hardware and a unique PalmOne Personal Digital Assistant (PDA) interface for a totally self-contained measurement package.

    More Information

    Open PDF
    240 Innova-Mass Inline
         
    Pick

    In-Line Multivariable Mass Flow Meter; Hazardous Area Approvals: FM, CSA, & CE, Smart Electronics; In-Line flow body sizes from 1/4" to 8?

    More Information

    Open PDF
    241 Innova-Mass Insertion
         
    Pick

    • Insertion Multivariable Mass Flow Meter;
    • Hazardous Area Approvals: FM, CSA, & CE,
    • Smart Electronics;
    • Insertion probe for line sizes 2" to 72"
    • More Information

    Open PDF
    LF05
         
    Pick

    Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. PVD coated titanium rotor. Hazardous area approved as standard.

    • 0 to 30 l/hr
    • +/-0.5% reading - linearity.
    • +/-0.1% repeatability.

    More Information

    Open PDF
    HO Liquid
         
    Pick

    Turbine flowmeter with 316 stainless steel body, providing a pulse output, for liquid service, 1/4" to 12". Ceramic bearings.

    More Information

    Open PDF
    HO Gas
         
    Pick

    Turbine flowmeter with 316 stainless steel body, providing a pulse output, for gas service, 1/4" to 12". Ceramic bearings.

    More Information

    Open PDF
    HO API
         
    Pick

    Turbine flowmeter with 316 stainless steel body, providing a pulse output, for liquid service, 3/4" to 12". Ceramic bearings.

    More Information

    Open PDF
    HO Sanitary
         
    Pick

    Turbine flowmeter with 316 stainless steel body, providing a pulse output, for liquid service, 1/4" to 3". Ceramic bearings. 3-A Sanitary standard 28-03.

    More Information

    Open PDF
    HO Autoclave
         
    Pick

    Turbine flowmeter with 316 stainless steel body, providing a pulse output, for liquid service, 1/4" to 3/4". Ceramic bearings. Autoclave male thread.

    More Information

    Open PDF
    Wing Nut Liquid
         
    Pick

    Wing Nut High Pressure flowmeter with 4130 stainless steel body, providing a pulse output, for liquid service. Ceramic bearings. Savage or FMC Wing Nut fitting

    More Information

    Open PDF
    Wing Nut Gas
         
    Pick

    Wing Nut High Pressure flowmeter with 4130 stainless steel body, providing a pulse output, for gas service. Ceramic bearings. Savage or FMC Wing Nut fitting.

    More Information

    Open PDF
    TG Series
         
    Pick

    RITTER wet-test (drum-type) gas flow meters are used universally to measure and record gas volume. From 0.1 to 18,000 litres/hour. Laboratory precision.

    More Information

    Open PDF
    V125
         
    Pick

    Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Titanium rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

    • 0 to 6,000 l/hr
    • +/-0.5% reading - linearity.
    • +/-0.1% repeatability.

    More Information

    Open PDF
    HF60
         
    Pick

    Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. PVD coated titanium rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

    • 0 to 3600 l/hr
    • +/-0.5% reading - linearity.
    • +/-0.1% repeatability.

    More Information

    Open PDF