Flowmeter Products

Filters applied: installation: InstallFixed [x]

Displaying 62 results

spacer
LF15
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. PVD coated titanium rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

  • 0 to 90 litres per hour
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
MF30
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Titanium rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

  • 0 to 180 litres per hour 
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
VFF4
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Titanium rotor dependent on pressure and flow rate range.

  • 0 to 400 litres per hour
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
VFF8
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Titanium rotor dependent on pressure and flow rate range.Hazardous area approved as standard.

  • 0 to 800 litres per hour
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
LF03
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. PVD coated titanium rotor. Hazardous area approved as standard.

  • 0 to 18 l/hr
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
HF20
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. PVD coated titanium rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

  • 0 to 1200 l/hr
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
HF40
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Titanium PVD coated rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

  • 0 to 2400 l/hr 
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
HF66
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Titanium coated rotor dependent on pressure and flow rate range. Hazardous area approved as standard. Special order only.

  • 0 to 4000 l/hr 
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
V270
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Titanium, PVD coated rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

  • 0 to 16,500 l/hr 
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
LMGN
     
Pick

Low cost, plastic bodied Pelton Wheel flowmeter with push-on hose connections, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 0.006 to 0.1 l/min up to 0.1 to 28 l/min.
  • +/-2% reading - linearity.
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    LMSPFA
         
    Pick

    Pelton Wheel flowmeter with 316 stainless steel body, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid up to 40 bar pressure.

  • 0.004 to 0.06 l/min up to 0.1 to 28 l/min.
  • +/-2% reading - linearity. [003 and 005 linearisation required]
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    LMX series
         
    Pick

    Inline Pelton Wheel flowmeter with integral flow straighteners, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 0.004 to 0.06 l/min up to 0.1 to 28 l/min and higher.
  • +/-2% reading - linearity. [003 and 005 linearisation required]
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    LMSS
         
    Pick

    Pelton Wheel flowmeter with high pressure 316 stainless steel body, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 0.004 to 0.06 l/min up to 0.1 to 28 l/min.
  • +/-2% reading - linearity. [003 and 005 linearisation required]
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    LMTi
         
    Pick

    Pelton Wheel flowmeter with titanium body, for aggressive applications, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 0.004 to 0.06 l/min up to 0.1 to 28 l/min.
  • +/-2% reading - linearity. [003 and 005 linearisation required]
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    LMHa
         
    Pick

    Pelton Wheel flowmeter with Hastelloy body, for aggressive applications, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 0.004 to 0.06 l/min up to 0.1 to 28 l/min.
  • +/-2% reading - linearity. [003 and 005 linearisation required]
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    LMDu
         
    Pick

    Pelton Wheel flowmeter with high pressure Duplex body, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 0.006 to 0.1 l/min up to 0.1 to 28 l/min and 33 l/min.
  • +/-2% reading - linearity.
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    LMXPVC
         
    Pick

    Low cost Pelton Wheel flowmeter with PVC body, 1/2" connections providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

    • 0.1 to 0.25 l/min up to 0.1 to 28 l/min.
    • +/-2% reading - linearity. [003 and 005 linearisation required]
    • +/-0.2% repeatability over top 90% of range.

    More Information

    Open PDF
    LMXPVC3
         
    Pick

    Low cost Pelton Wheel flowmeter with all-PVC body, no wetted metal parts, 1/2" connections providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

    • 0.1 to 0.25 l/min up to 0.1 to 28 l/min.
    • +/-2% reading - linearity. [003 and 005 linearisation required]
    • +/-0.2% repeatability over top 90% of range.

    More Information

    Open PDF
    MM SPFA
         
    Pick

    Designed for use with medium pressure and temperature applications. Pelton Wheel flowmeter with 316 stainless steel body, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid up to 40 bar pressure.

  • 1 to 65 l/min up to 10 to 500 l/min. (up to 300 to 5500 l/min by special order)
  • +/-2% reading - linearity.
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    MMSS
         
    Pick

    Designed for use with high pressure and/or high temperature applications. Pelton Wheel flowmeter with 316 stainless steel body, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 1 to 65 l/min up to 10 to 500 l/min. (up to 300 to 5500 l/min by special order)
  • +/-2% reading - linearity.
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    MMTi
         
    Pick

    Designed for use in aggressive applications. Pelton Wheel flowmeter with titanium body, providing a pulse output Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 1 to 65 l/min up to 10 to 500 l/min. (up to 300 to 5500 l/min by special order)
  • +/-2% reading - linearity.
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    MM PVC
         
    Pick

    Low cost high flow Pelton Wheel flowmeter with PVC body, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 1 to 65 l/min up to 10 to 500 l/min. (up to 300 to 5500 l/min by special order)
  • +/-2% reading - linearity.
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    MM PVC3
         
    Pick

    High flow Pelton Wheel flowmeter with all-PVC body, no metal wetted parts, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 1 to 65 l/min up to 10 to 500 l/min. (up to 300 to 5500 l/min by special order)
  • +/-2% reading - linearity.
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    50 Series Smart-Trak
         
    Pick

    Digital cost-efficient gas mass flow meters and controllers; multi-gas capability. 7 ranges off-the-shelf. Meter in Aluminium. Controller in 316SS or Aluminium. Designed for OEM applications.

    More Information

    Open PDF
    100 Series Smart-Trak
         
    Pick

    Digital high performance gas mass flow meters and controllers; multi-gas capability; stainless steel construction. Now Smart Trak 2.

    More Information

    Open PDF
    101 Micro-Trak
         
    Pick

    Specifically designed for most gases down to 0.1 sccm

    More Information

    Open PDF
    820 Top-Trak
         
    Pick

    Low-cost gas mass flow meter with tiltable digital readout; nylon or aluminium construction.

    More Information

    Open PDF
    820 S Top-Trak
         
    Pick

    Low-cost gas mass flow meter with tiltable digital readout; stainless steel construction.

    More Information

    Open PDF
    810 Mass-Trak
         
    Pick

    Low-cost gas mass flow controller with digital readout; nylon construction.

    More Information

    Open PDF
    830-840 Side-Trak
         
    Pick

    High performance gas mass flow meters and controllers; stainless steel construction.

    More Information

    Open PDF
    180 Series Max-Trak
         
    Pick

    Digital high performance NEMA 6/IP67 gas mass flow meters and controllers with stainless steel process fittings; multi-gas capability; stainless steel construction.

    More Information

    Open PDF
    640S Steel-Mass
         
    Pick

    Insertion mass flow meters; NEMA 4X and Hazardous Area Approvals: FM, ATEX, CSA, EEx, PED, CE, Cenelec; Smart electronics; Insertion probe lengths 6? to 36?

    More Information

    Open PDF
    780S Flat-Trak
         
    Pick

    In-line mass flow meters; NEMA 4X and Hazardous Area Approvals: FM, ATEX, CSA, EEx, PED, CE, Cenelec; Smart electronics; Body size 1/4" to 8" NPT, Buttweld or ANSI

    More Information

    Open PDF
    780S-UHP Ultra High Purity
         
    Pick

    Ultra-High-Purity In-Line mass flow meter; NEMA 4X and Hazardous Area, Approvals: FM, ATEX, CSA, EEx, PED, CE, Cenelec; Smart electronics; flow body sizes from 3/8? to 6?.

    More Information

    Open PDF
    620S Fast-Flo
         
    Pick

    Fast response (200ms) insertion mass flow meters for light-industrial use; NEMA 4X; Smart electronics; Insertion probe lengths 3.9? to 24?

    More Information

    Open PDF
    730 Accu-Mass
         
    Pick

    Inline mass flow meter. Quick response (200ms). Low-flow sensitivity. 1/4" to 1 1/4". Special order.

    More Information

    Open PDF
    205 Innova-Sonic
         
    Pick

    Ultrasonic flowmeter system incorporating digital signal processing. Innova-Sonic offers a low power consumption, clear display and user friendly menu selection.

    More Information

    Open PDF
    206 Innova-Sonic
         
    Pick

    In-line Ultrasonic flowmeter system incorporating digital signal processing. Innova-Sonic offers a low power consumption, clear display and user friendly menu selection. 1" to 10".

    More Information

    Open PDF
    240 Innova-Mass Inline
         
    Pick

    In-Line Multivariable Mass Flow Meter; Hazardous Area Approvals: FM, CSA, & CE, Smart Electronics; In-Line flow body sizes from 1/4" to 8?

    More Information

    Open PDF
    241 Innova-Mass Insertion
         
    Pick

    • Insertion Multivariable Mass Flow Meter;
    • Hazardous Area Approvals: FM, CSA, & CE,
    • Smart Electronics;
    • Insertion probe for line sizes 2" to 72"
    • More Information

    Open PDF
    SL-500 Cal Trak Mass Flow Calibrator
         
    Pick

    High-precision, cost-effective calibration. Primary Standard. Manufactured to ISO 17025 Standards

    More Information

    Open PDF
    SL-800 Cal Trak Mass Flow Calibrator
         
    Pick

    High-precision, cost-effective calibration. Primary Standard. Manufactured to ISO 17025 Standards

    More Information

    Open PDF
    Cal-Trak XL High Flow Calibrator
         
    Pick

    High-precision, cost-effective calibration. Primary Standard. Manufactured to ISO 17025 Standards in NVLAP certified laboratory

    More Information

    Open PDF
    LF05
         
    Pick

    Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. PVD coated titanium rotor. Hazardous area approved as standard.

    • 0 to 30 l/hr
    • +/-0.5% reading - linearity.
    • +/-0.1% repeatability.

    More Information

    Open PDF
    HO Liquid
         
    Pick

    Turbine flowmeter with 316 stainless steel body, providing a pulse output, for liquid service, 1/4" to 12". Ceramic bearings.

    More Information

    Open PDF
    HO Gas
         
    Pick

    Turbine flowmeter with 316 stainless steel body, providing a pulse output, for gas service, 1/4" to 12". Ceramic bearings.

    More Information

    Open PDF
    HO API
         
    Pick

    Turbine flowmeter with 316 stainless steel body, providing a pulse output, for liquid service, 3/4" to 12". Ceramic bearings.

    More Information

    Open PDF
    HO Sanitary
         
    Pick

    Turbine flowmeter with 316 stainless steel body, providing a pulse output, for liquid service, 1/4" to 3". Ceramic bearings. 3-A Sanitary standard 28-03.

    More Information

    Open PDF
    HO Autoclave
         
    Pick

    Turbine flowmeter with 316 stainless steel body, providing a pulse output, for liquid service, 1/4" to 3/4". Ceramic bearings. Autoclave male thread.

    More Information

    Open PDF
    Wing Nut Liquid
         
    Pick

    Wing Nut High Pressure flowmeter with 4130 stainless steel body, providing a pulse output, for liquid service. Ceramic bearings. Savage or FMC Wing Nut fitting

    More Information

    Open PDF
    Wing Nut Gas
         
    Pick

    Wing Nut High Pressure flowmeter with 4130 stainless steel body, providing a pulse output, for gas service. Ceramic bearings. Savage or FMC Wing Nut fitting.

    More Information

    Open PDF
    OME
         
    Pick

    Low cost Aluminium meter for general applications with low pressures and temperatures with 3 meter sizes from 1/2" to 1". Suitable for any non-abrasive chemically compatible slightly lubricating liquid with viscosities up to 1,000,000 cSt.

  • 0.1 to 10 l/min up to 1 to 100 litres per minute
  • +/-0.1 to 0.3% reading - linearity.
  • +/-0.01 to 0.03% repeatability.
  • More Information

    Open PDF
    OMG
         
    Pick

    Designed for use with medium pressure and high temperature. Grey cast iron and steel bodied meter with 7 meter sizes from 1/2" to 6". Suitable for any non-abrasive chemically compatible slightly lubricating liquid with viscosities up to 1,000,000 cSt.

  • 0.1 to 10 l/min up to 50 to 7,500 litres per minute
  • +/-0.1 to 0.3% reading - linearity.
  • +/-0.01 to 0.03% repeatability.
  • More Information

    Open PDF
    OMH
         
    Pick

    Designed for very high pressure - 420bar. Spheroidal graphite cast iron and steel bodied meter with 6 meter sizes from 1/2" to 4". Suitable for any non-abrasive chemically compatible slightly lubricating liquid with viscosities up to 1,000,000 cSt.

  • 0.1 to 10 l/min up to 20 to 2,000 litres per minute
  • +/-0.1 to 0.3% reading - linearity.
  • +/-0.01 to 0.03% repeatability.
  • More Information

    Open PDF
    OMK
         
    Pick

    Designed for corrosive applications. 304 or 316 stainless steel bodied meter with PTFE spindles and 3 meter sizes from 1/2" to 1". Suitable for any non-abrasive chemically compatible slightly lubricating liquid with viscosities up to 1,000,000 cSt.

  • 0.2 to 10 l/min up to 2 to 100 litres per minute
  • +/-0.5 to 1% reading - linearity.
  • +/-0.1% repeatability.
  • More Information

    Open PDF
    OMX
         
    Pick

    Designed for ultra high pressure applications. Stainless steel bodied meter with nitride steel spindles specially designed for pressures of 630 bar and higher.

  • 0.1 to 10 l/min up to 20 to 2,000 litres per minute
  • +/-0.1 to 0.3% reading - linearity.
  • +/-0.01 to 0.03% repeatability.
  • More Information

    Open PDF
    TG Series
         
    Pick

    RITTER wet-test (drum-type) gas flow meters are used universally to measure and record gas volume. From 0.1 to 18,000 litres/hour. Laboratory precision.

    More Information

    Open PDF
    MGC MilliGas Counter
         
    Pick

    The patented MilliGascounter is designed for the measurement of small amounts of gas with ultra-low flow rates. New PVDF version available.

  • Accuracy: +/-3% of reading
  • Flow Range: From 1 ml/hr to 1 litre/hr
  • More Information

    Open PDF
    BG Bellows Gas Meter
         
    Pick

    RITTER bellows-type gas meters are applicable for measuring the volume of flowing inert and dry gases and are particularly effective at high gas flows.

    More Information

    Open PDF
    V125
         
    Pick

    Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Titanium rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

    • 0 to 6,000 l/hr
    • +/-0.5% reading - linearity.
    • +/-0.1% repeatability.

    More Information

    Open PDF
    HF60
         
    Pick

    Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. PVD coated titanium rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

    • 0 to 3600 l/hr
    • +/-0.5% reading - linearity.
    • +/-0.1% repeatability.

    More Information

    Open PDF
    LMX VTC series
         
    Pick

    Inline Pelton Wheel flowmeter with integral flow straighteners, with display. Suitable for any non abrasive, chemical compatible low viscosity liquid.

    • 0.004 to 0.06 l/min up to 0.1 to 28 l/min and higher.
    • +/-1% reading - linearity.
    • +/-0.2% repeatability over top 90% of range.

    More Information

    Open PDF