Flowmeter Products

Filters applied: fflorange: FloRange04 [x]

Displaying 36 results

spacer
MF30
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Titanium rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

  • 0 to 180 litres per hour 
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
VFF4
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Titanium rotor dependent on pressure and flow rate range.

  • 0 to 400 litres per hour
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
VFF8
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Titanium rotor dependent on pressure and flow rate range.Hazardous area approved as standard.

  • 0 to 800 litres per hour
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
HF20
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. PVD coated titanium rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

  • 0 to 1200 l/hr
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
LMGN
     
Pick

Low cost, plastic bodied Pelton Wheel flowmeter with push-on hose connections, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 0.006 to 0.1 l/min up to 0.1 to 28 l/min.
  • +/-2% reading - linearity.
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    LMSPFA
         
    Pick

    Pelton Wheel flowmeter with 316 stainless steel body, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid up to 40 bar pressure.

  • 0.004 to 0.06 l/min up to 0.1 to 28 l/min.
  • +/-2% reading - linearity. [003 and 005 linearisation required]
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    LMX series
         
    Pick

    Inline Pelton Wheel flowmeter with integral flow straighteners, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 0.004 to 0.06 l/min up to 0.1 to 28 l/min and higher.
  • +/-2% reading - linearity. [003 and 005 linearisation required]
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    LMSS
         
    Pick

    Pelton Wheel flowmeter with high pressure 316 stainless steel body, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 0.004 to 0.06 l/min up to 0.1 to 28 l/min.
  • +/-2% reading - linearity. [003 and 005 linearisation required]
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    LMTi
         
    Pick

    Pelton Wheel flowmeter with titanium body, for aggressive applications, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 0.004 to 0.06 l/min up to 0.1 to 28 l/min.
  • +/-2% reading - linearity. [003 and 005 linearisation required]
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    LMHa
         
    Pick

    Pelton Wheel flowmeter with Hastelloy body, for aggressive applications, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 0.004 to 0.06 l/min up to 0.1 to 28 l/min.
  • +/-2% reading - linearity. [003 and 005 linearisation required]
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    LMDu
         
    Pick

    Pelton Wheel flowmeter with high pressure Duplex body, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 0.006 to 0.1 l/min up to 0.1 to 28 l/min and 33 l/min.
  • +/-2% reading - linearity.
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    LMPVC
         
    Pick

    Low cost Pelton Wheel flowmeter with PVC body, 1/2" connections providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 0.1 to 0.25 l/min up to 0.1 to 28 l/min.
  • +/-2% reading - linearity. [003 and 005 linearisation required]
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    LMPVC3
         
    Pick

    Low cost Pelton Wheel flowmeter with all-PVC body, no wetted metal parts, 1/2" connections providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 0.1 to 0.25 l/min up to 0.1 to 28 l/min.
  • +/-2% reading - linearity. [003 and 005 linearisation required]
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    50 Series Smart-Trak
         
    Pick

    Digital cost-efficient gas mass flow meters and controllers; multi-gas capability. 7 ranges off-the-shelf. Meter in Aluminium. Controller in 316SS or Aluminium. Designed for OEM applications.

    More Information

    Open PDF
    100 Series Smart-Trak
         
    Pick

    Digital high performance gas mass flow meters and controllers; multi-gas capability; stainless steel construction. Now Smart Trak 2.

    More Information

    Open PDF
    101 Micro-Trak
         
    Pick

    Specifically designed for most gases down to 0.1 sccm

    More Information

    Open PDF
    820 Top-Trak
         
    Pick

    Low-cost gas mass flow meter with tiltable digital readout; nylon or aluminium construction.

    More Information

    Open PDF
    820 S Top-Trak
         
    Pick

    Low-cost gas mass flow meter with tiltable digital readout; stainless steel construction.

    More Information

    Open PDF
    810 Mass-Trak
         
    Pick

    Low-cost gas mass flow controller with digital readout; nylon construction.

    More Information

    Open PDF
    830-840 Side-Trak
         
    Pick

    High performance gas mass flow meters and controllers; stainless steel construction.

    More Information

    Open PDF
    780S Flat-Trak
         
    Pick

    In-line mass flow meters; NEMA 4X and Hazardous Area Approvals: FM, ATEX, CSA, EEx, PED, CE, Cenelec; Smart electronics; Body size 1/4" to 8" NPT, Buttweld or ANSI

    More Information

    Open PDF
    780S-UHP Ultra High Purity
         
    Pick

    Ultra-High-Purity In-Line mass flow meter; NEMA 4X and Hazardous Area, Approvals: FM, ATEX, CSA, EEx, PED, CE, Cenelec; Smart electronics; flow body sizes from 3/8? to 6?.

    More Information

    Open PDF
    730 Accu-Mass
         
    Pick

    Inline mass flow meter. Quick response (200ms). Low-flow sensitivity. 1/4" to 1 1/4". Special order.

    More Information

    Open PDF
    205 Innova-Sonic
         
    Pick

    Ultrasonic flowmeter system incorporating digital signal processing. Innova-Sonic offers a low power consumption, clear display and user friendly menu selection.

    More Information

    Open PDF
    206 Innova-Sonic
         
    Pick

    In-line Ultrasonic flowmeter system incorporating digital signal processing. Innova-Sonic offers a low power consumption, clear display and user friendly menu selection. 1" to 10".

    More Information

    Open PDF
    210 Innova-Sonic
         
    Pick

    Fully field portable ultrasonic system complete with spare battery pack, non-invasive clamp-on transducers, mounting hardware and a unique PalmOne Personal Digital Assistant (PDA) interface for a totally self-contained measurement package.

    More Information

    Open PDF
    SL-500 Cal Trak Mass Flow Calibrator
         
    Pick

    High-precision, cost-effective calibration. Primary Standard. Manufactured to ISO 17025 Standards

    More Information

    Open PDF
    SL-800 Cal Trak Mass Flow Calibrator
         
    Pick

    High-precision, cost-effective calibration. Primary Standard. Manufactured to ISO 17025 Standards

    More Information

    Open PDF
    HO Liquid
         
    Pick

    Turbine flowmeter with 316 stainless steel body, providing a pulse output, for liquid service, 1/4" to 12". Ceramic bearings.

    More Information

    Open PDF
    HO Autoclave
         
    Pick

    Turbine flowmeter with 316 stainless steel body, providing a pulse output, for liquid service, 1/4" to 3/4". Ceramic bearings. Autoclave male thread.

    More Information

    Open PDF
    OME
         
    Pick

    Low cost Aluminium meter for general applications with low pressures and temperatures with 3 meter sizes from 1/2" to 1". Suitable for any non-abrasive chemically compatible slightly lubricating liquid with viscosities up to 1,000,000 cSt.

  • 0.1 to 10 l/min up to 1 to 100 litres per minute
  • +/-0.1 to 0.3% reading - linearity.
  • +/-0.01 to 0.03% repeatability.
  • More Information

    Open PDF
    OMG
         
    Pick

    Designed for use with medium pressure and high temperature. Grey cast iron and steel bodied meter with 7 meter sizes from 1/2" to 6". Suitable for any non-abrasive chemically compatible slightly lubricating liquid with viscosities up to 1,000,000 cSt.

  • 0.1 to 10 l/min up to 50 to 7,500 litres per minute
  • +/-0.1 to 0.3% reading - linearity.
  • +/-0.01 to 0.03% repeatability.
  • More Information

    Open PDF
    OMH
         
    Pick

    Designed for very high pressure - 420bar. Spheroidal graphite cast iron and steel bodied meter with 6 meter sizes from 1/2" to 4". Suitable for any non-abrasive chemically compatible slightly lubricating liquid with viscosities up to 1,000,000 cSt.

  • 0.1 to 10 l/min up to 20 to 2,000 litres per minute
  • +/-0.1 to 0.3% reading - linearity.
  • +/-0.01 to 0.03% repeatability.
  • More Information

    Open PDF
    OMX
         
    Pick

    Designed for ultra high pressure applications. Stainless steel bodied meter with nitride steel spindles specially designed for pressures of 630 bar and higher.

  • 0.1 to 10 l/min up to 20 to 2,000 litres per minute
  • +/-0.1 to 0.3% reading - linearity.
  • +/-0.01 to 0.03% repeatability.
  • More Information

    Open PDF
    TG Series
         
    Pick

    RITTER wet-test (drum-type) gas flow meters are used universally to measure and record gas volume. From 0.1 to 18,000 litres/hour. Laboratory precision.

    More Information

    Open PDF
    LMX VTC series
         
    Pick

    Inline Pelton Wheel flowmeter with integral flow straighteners, with display. Suitable for any non abrasive, chemical compatible low viscosity liquid.

    • 0.004 to 0.06 l/min up to 0.1 to 28 l/min and higher.
    • +/-1% reading - linearity.
    • +/-0.2% repeatability over top 90% of range.

    More Information

    Open PDF