Flowmeter Products

Filters applied: endfit: EndFitting02 [x]

Displaying 30 results

spacer
LF15
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. PVD coated titanium rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

  • 0 to 90 litres per hour
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
MF30
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Titanium rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

  • 0 to 180 litres per hour 
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
VFF4
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Titanium rotor dependent on pressure and flow rate range.

  • 0 to 400 litres per hour
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
VFF8
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Titanium rotor dependent on pressure and flow rate range.Hazardous area approved as standard.

  • 0 to 800 litres per hour
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
LF03
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. PVD coated titanium rotor. Hazardous area approved as standard.

  • 0 to 18 l/hr
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
HF20
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. PVD coated titanium rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

  • 0 to 1200 l/hr
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
HF40
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Titanium PVD coated rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

  • 0 to 2400 l/hr 
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
HF66
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Titanium coated rotor dependent on pressure and flow rate range. Hazardous area approved as standard. Special order only.

  • 0 to 4000 l/hr 
  • +/-1% reading - linearity.
  • +/-0.25% repeatability.

More Information

Open PDF
V270
     
Pick

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Titanium, PVD coated rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

  • 0 to 16,500 l/hr 
  • +/-0.5% reading - linearity.
  • +/-0.1% repeatability.

More Information

Open PDF
LMSS
     
Pick

Pelton Wheel flowmeter with high pressure 316 stainless steel body, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 0.004 to 0.06 l/min up to 0.1 to 28 l/min.
  • +/-2% reading - linearity. [003 and 005 linearisation required]
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    LMTi
         
    Pick

    Pelton Wheel flowmeter with titanium body, for aggressive applications, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 0.004 to 0.06 l/min up to 0.1 to 28 l/min.
  • +/-2% reading - linearity. [003 and 005 linearisation required]
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    LMHa
         
    Pick

    Pelton Wheel flowmeter with Hastelloy body, for aggressive applications, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 0.004 to 0.06 l/min up to 0.1 to 28 l/min.
  • +/-2% reading - linearity. [003 and 005 linearisation required]
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    LMDu
         
    Pick

    Pelton Wheel flowmeter with high pressure Duplex body, providing a pulse output. Suitable for any non abrasive, chemical compatible low viscosity liquid.

  • 0.006 to 0.1 l/min up to 0.1 to 28 l/min and 33 l/min.
  • +/-2% reading - linearity.
  • +/-0.2% repeatability over top 90% of range.
  • More Information

    Open PDF
    50 Series Smart-Trak
         
    Pick

    Digital cost-efficient gas mass flow meters and controllers; multi-gas capability. 7 ranges off-the-shelf. Meter in Aluminium. Controller in 316SS or Aluminium. Designed for OEM applications.

    More Information

    Open PDF
    100 Series Smart-Trak
         
    Pick

    Digital high performance gas mass flow meters and controllers; multi-gas capability; stainless steel construction. Now Smart Trak 2.

    More Information

    Open PDF
    101 Micro-Trak
         
    Pick

    Specifically designed for most gases down to 0.1 sccm

    More Information

    Open PDF
    820 Top-Trak
         
    Pick

    Low-cost gas mass flow meter with tiltable digital readout; nylon or aluminium construction.

    More Information

    Open PDF
    820 S Top-Trak
         
    Pick

    Low-cost gas mass flow meter with tiltable digital readout; stainless steel construction.

    More Information

    Open PDF
    810 Mass-Trak
         
    Pick

    Low-cost gas mass flow controller with digital readout; nylon construction.

    More Information

    Open PDF
    830-840 Side-Trak
         
    Pick

    High performance gas mass flow meters and controllers; stainless steel construction.

    More Information

    Open PDF
    180 Series Max-Trak
         
    Pick

    Digital high performance NEMA 6/IP67 gas mass flow meters and controllers with stainless steel process fittings; multi-gas capability; stainless steel construction.

    More Information

    Open PDF
    640S Steel-Mass
         
    Pick

    Insertion mass flow meters; NEMA 4X and Hazardous Area Approvals: FM, ATEX, CSA, EEx, PED, CE, Cenelec; Smart electronics; Insertion probe lengths 6? to 36?

    More Information

    Open PDF
    620S Fast-Flo
         
    Pick

    Fast response (200ms) insertion mass flow meters for light-industrial use; NEMA 4X; Smart electronics; Insertion probe lengths 3.9? to 24?

    More Information

    Open PDF
    241 Innova-Mass Insertion
         
    Pick

    • Insertion Multivariable Mass Flow Meter;
    • Hazardous Area Approvals: FM, CSA, & CE,
    • Smart Electronics;
    • Insertion probe for line sizes 2" to 72"
    • More Information

    Open PDF
    SL-500 Cal Trak Mass Flow Calibrator
         
    Pick

    High-precision, cost-effective calibration. Primary Standard. Manufactured to ISO 17025 Standards

    More Information

    Open PDF
    SL-800 Cal Trak Mass Flow Calibrator
         
    Pick

    High-precision, cost-effective calibration. Primary Standard. Manufactured to ISO 17025 Standards

    More Information

    Open PDF
    Cal-Trak XL High Flow Calibrator
         
    Pick

    High-precision, cost-effective calibration. Primary Standard. Manufactured to ISO 17025 Standards in NVLAP certified laboratory

    More Information

    Open PDF
    LF05
         
    Pick

    Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. PVD coated titanium rotor. Hazardous area approved as standard.

    • 0 to 30 l/hr
    • +/-0.5% reading - linearity.
    • +/-0.1% repeatability.

    More Information

    Open PDF
    V125
         
    Pick

    Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Titanium rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

    • 0 to 6,000 l/hr
    • +/-0.5% reading - linearity.
    • +/-0.1% repeatability.

    More Information

    Open PDF
    HF60
         
    Pick

    Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. PVD coated titanium rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

    • 0 to 3600 l/hr
    • +/-0.5% reading - linearity.
    • +/-0.1% repeatability.

    More Information

    Open PDF