Flowmeter Products

Filters applied: acurcy: Accuracy2 [x]

Displaying 7 results

spacer
Cal-Trak XL High Flow Calibrator
     
Pick

High-precision, cost-effective calibration. Primary Standard. Manufactured to ISO 17025 Standards in NVLAP certified laboratory

More Information

Open PDF
HO API
     
Pick

Turbine flowmeter with 316 stainless steel body, providing a pulse output, for liquid service, 3/4" to 12". Ceramic bearings.

More Information

Open PDF
OME
     
Pick

Low cost Aluminium meter for general applications with low pressures and temperatures with 3 meter sizes from 1/2" to 1". Suitable for any non-abrasive chemically compatible slightly lubricating liquid with viscosities up to 1,000,000 cSt.

  • 0.1 to 10 l/min up to 1 to 100 litres per minute
  • +/-0.1 to 0.3% reading - linearity.
  • +/-0.01 to 0.03% repeatability.
  • More Information

    Open PDF
    OMG
         
    Pick

    Designed for use with medium pressure and high temperature. Grey cast iron and steel bodied meter with 7 meter sizes from 1/2" to 6". Suitable for any non-abrasive chemically compatible slightly lubricating liquid with viscosities up to 1,000,000 cSt.

  • 0.1 to 10 l/min up to 50 to 7,500 litres per minute
  • +/-0.1 to 0.3% reading - linearity.
  • +/-0.01 to 0.03% repeatability.
  • More Information

    Open PDF
    OMH
         
    Pick

    Designed for very high pressure - 420bar. Spheroidal graphite cast iron and steel bodied meter with 6 meter sizes from 1/2" to 4". Suitable for any non-abrasive chemically compatible slightly lubricating liquid with viscosities up to 1,000,000 cSt.

  • 0.1 to 10 l/min up to 20 to 2,000 litres per minute
  • +/-0.1 to 0.3% reading - linearity.
  • +/-0.01 to 0.03% repeatability.
  • More Information

    Open PDF
    OMX
         
    Pick

    Designed for ultra high pressure applications. Stainless steel bodied meter with nitride steel spindles specially designed for pressures of 630 bar and higher.

  • 0.1 to 10 l/min up to 20 to 2,000 litres per minute
  • +/-0.1 to 0.3% reading - linearity.
  • +/-0.01 to 0.03% repeatability.
  • More Information

    Open PDF
    TG Series
         
    Pick

    RITTER wet-test (drum-type) gas flow meters are used universally to measure and record gas volume. From 0.1 to 18,000 litres/hour. Laboratory precision.

    More Information

    Open PDF